Postat: 9 augusti 2005, 18:43
Sprang på den här motorn när jag kollade runt på lite bilar i U.S...
Har aldrig hört talas om den tidigare...
Försöker hitta info om den men det är inte så lätt...
Nån som kan fylla på?
* Water cooled, 4 stroke single overhead cam gasoline engine
* It has an inline 5-cylinder 30 degree slant mount cylinder arrangement
* The bore and stroke is 85.0 x 86.4 mm
* The actual displacement is 2,451 cubic centimetres or 149 cubic inches
* The compression ratio is 9.0:1
* The valve train is belt driven with a single overhead cam and 4 valves per cylinder
* The lubrication system is a forced and wet sump trochoid pump
* This engine requires UNLEADED grade gasoline with a 91 Pump Octane Number or higher
Engine Type: 2.5-litre,SOHC, 20 valve, inline 5 cylinder
Horsepower (SAE Net): 196 hp @ 6300rpm
Torque (SAE Net): 185lbs-ft @ 3900rpm
Redline: 6800rpm
Fuel Cutoff: 7100rpm
Engine Block: Aluminum alloy with cast iron cykinder liners
Cylinder Heads : Aluminum alloy
Har aldrig hört talas om den tidigare...
Försöker hitta info om den men det är inte så lätt...
Nån som kan fylla på?
* Water cooled, 4 stroke single overhead cam gasoline engine
* It has an inline 5-cylinder 30 degree slant mount cylinder arrangement
* The bore and stroke is 85.0 x 86.4 mm
* The actual displacement is 2,451 cubic centimetres or 149 cubic inches
* The compression ratio is 9.0:1
* The valve train is belt driven with a single overhead cam and 4 valves per cylinder
* The lubrication system is a forced and wet sump trochoid pump
* This engine requires UNLEADED grade gasoline with a 91 Pump Octane Number or higher
Engine Type: 2.5-litre,SOHC, 20 valve, inline 5 cylinder
Horsepower (SAE Net): 196 hp @ 6300rpm
Torque (SAE Net): 185lbs-ft @ 3900rpm
Redline: 6800rpm
Fuel Cutoff: 7100rpm
Engine Block: Aluminum alloy with cast iron cykinder liners
Cylinder Heads : Aluminum alloy